Home
About
Agencies
Agency RSS
Agency
Listservs
Archives
Multimedia
Subscribe
Contact

Spring Load Limit Release #11





Department of Transportation

For immediate release: April 4, 2017

For more information: Dan Varilek, 773-3571 daniel.varilek@state.sd.us

 

SPRING LOAD RESTRICTION PRESS RELEASE
April 4, 2017

 

PIERRE, S.D. – Effective at 8:00 a.m. CST, April 6, 2017, Spring Load Limit Restrictions will be removed from the road segments shown in the table below.

 

2017 STATE HIGHWAY SPRING LOAD LIMIT RESTRICTIONS


Highway

Location

Begin/End MRM

Length

Posting

Region

SD 1806S

Jct. SD273 north to US83

138.45 to 180.05

41.6

7 Tons/Axle

Pierre

SD 1806N

Intersection west of the dam to Mission Ridge

191.61 to 221.05

29.4

7 Tons/Axle

Pierre

SD 1804N

Hughes/Sully County line to US212

266.35 to 303.3

37.0

7 Tons/Axle

Pierre

 

 

 

 

 

 

 

The effective date of the load restriction removals was determined by weather and road conditions.

A spring load restriction report is usually issued in advance of any major load restriction change.  This report is issued for guidance only and does not take precedence over load restriction signs in place. For further information or a copy of a Spring Load Restriction Map, please contact the DOT at 605-773-3571. Spring Load Limit Information may also be found on the Internet at:

http://www.safetravelusa.com/sd/

Click on Commercial Vehicle Restrictions on Base Layer then truck icon for current restriction

http://www.sddot.com/travelers/loadlimits/Default.aspx

Individuals can subscribe to an email list to receive Spring Load Limit Restriction information electronically. To subscribe go to:

            https://listserv.sd.gov/scripts/wa.exe?A0=DOTSPRINGLOADLIMITS

Click subscribe located on the right side of the screen and follow the instructions. A valid email address is required. If you would like to unsubscribe at any time from the list, visit the same site, click Unsubscribe and enter the information and email you subscribed with.