Home
About
Agencies
Agency RSS
Agency
Listservs
Archives
Multimedia
Subscribe
Contact

Spring Load Limit Restriction Release 2





Department of Transportation

For immediate release: March 12, 2018

For more information: Dan Varilek, 773-3571 daniel.varilek@state.sd.us

 

SPRING LOAD RESTRICTION PRESS RELEASE
March 12, 2018

 

PIERRE, S.D. – Effective at Noon CDT, March 12, 2018, Spring Load Limit Restrictions will apply to the road segment and at the indicated weight limit shown in the table below.

 

2018 STATE HIGHWAY SPRING LOAD LIMIT RESTRICTIONS


Highway

Location

Begin/End MRM

Length

Posting

Region

SD 26

From Hwy 47 to Hwy 45

230.12 to 252.85

22.73

6 Tons/Axle

Aberdeen

SD 28

From US 281 to JCT 394 Ave

269.97 to 278.01

8.04

6 Tons/Axle

Aberdeen

 

The effective date of the load restrictions is determined by weather and road conditions.

A spring load restriction report is usually issued in advance of any major load restriction change.  This report is issued for guidance only and does not take precedence over load restriction signs in place. For further information or a copy of a Spring Load Restriction Map, please contact the DOT at 605-773-3571. Spring Load Limit Information may also be found on the Internet at:

            http://www.safetravelusa.com/sd/

Click on Commercial Vehicle Restrictions on Base Layer then truck icon for current restriction

http://www.sddot.com/travelers/loadlimits/Default.aspx

Individuals can subscribe to an email list to receive Spring Load Limit Restriction information electronically. To subscribe go to:

            https://listserv.sd.gov/scripts/wa.exe?A0=DOTSPRINGLOADLIMITS

Click subscribe located on the right side of the screen and follow the instructions. A valid email address is required. If you would like to unsubscribe at any time from the list, visit the same site, click Unsubscribe and enter the information and email you subscribed with.