Home
About
Agencies
Agency RSS
Agency
Listservs
Archives
Multimedia
Subscribe
Contact

2022 STATE HIGHWAY SPRING LOAD LIMIT RESTRICTIONS Press Release #4 (Week of March 7-11, 2022) (Amended)





For Immediate Release: 
Friday, March 4, 2022


Contact: 
Dan Varilek, Winter Maintenance Specialist, 605-773-3571

 

PIERRE, S.D. – Spring Load Limit Restrictions will apply to the road segment(s) and at the indicated weight limit shown in the table below.

 

Effective Date


Highway

Location

Begin/End MRM

Length

Posting

Region

March 7, 2022

SD 1806

Jct. SD 273 north to US 83

138.45 to 180.05

41.6

6 Tons/Axle

Pierre

March 7, 2022

SD 1806

Intersection west of the dam to Mission Ridge

193.83 to 221.05

27.2

7 Tons/Axle

Pierre

March 8, 2022

SD 26

From Hwy 47 to Hwy 45                

230.12 to 252.85

22.7

6 Tons/Axle

80,000 GVW

Aberdeen

March 8, 2022

SD 26

From Hwy 45 to Hand/Spink Co Line

253.85 to 267.77

13.9

6 Tons/Axle

80,000 GVW

Aberdeen

March 8, 2022

SD 45

US 14 to US 212

112.35 to 137.72

25.4

8 Tons/Axle

80,000 GVW

Aberdeen

March 8, 2022

SD 28

From US 281 to SD 37

269.97 to 283.99

14.0

7 Tons/Axle

80,000 GVW

Aberdeen

 

The effective date of a load restriction is determined by weather and road conditions. When restrictions go into effect, a notice will be sent out and posted on the spring load restriction page of the South Dakota Truck Info website at https://sdtruckinfo.sd.gov/spring-load-restrictions/.

 

A spring load restriction report is usually issued in advance of any major load restriction change. This report is issued for guidance only and does not take precedence over any load restriction signs in place. For further information, or a copy of a Spring Load Restriction map, please contact the SDDOT at 605-773-3571.

 

Spring Load Limit Information is available at https://sdtruckinfo.sd.gov/rules-regulations/size-weight-regulations/spring-load-restrictions/  and also on the SD511 site at https://sd511.org/; click on Traffic Notices then CVO Restrictions for current restriction.

 

Individuals can subscribe to an email list to receive spring load limit restriction information electronically at https://listserv.sd.gov/scripts/wa.exe?A0=DOTSPRINGLOADLIMITS. Click subscribe located on the right side of the screen and follow the instructions. A valid email address is required. If you would like to unsubscribe at any time from the list, visit the same site, click unsubscribe, and enter the information and email you subscribed with.

 

For more information, contact Dan Varilek, Winter Maintenance Specialist, at 605-773-3571 or by email at daniel.varilek@state.sd.us. 

  

-30-